今日双色球开奖号码|双色球所有开奖号码
 

Home > Electrotechnics > Products > Transformation

 

Transformation

Our products are manufactured by casting (weakly doped silver alloy) in the form of billets and by powder metallurgy.

Powders are blended using dry or wet mixing. The pseudo-alloyobtained is used either directly to produce tips by compression using a rotary press or transformed into billets by compressing the powder mixture at high pressure and subjecting it to thermal treatment (sintering). The aim of these two operations is to increase the density of the pseudo-alloy.

The billets (cast or compressed) are pushed through a die to produce extruded wire or strips. These products are then drawed or rolled or calibrated to the final shape.

Wire drawing consists of reducing the section of wires using dies of smaller and smaller diameter until the required dimension is obtained. Each drawing process or series of drawing processes is accompanied by thermal treatment (annealing).

Wire is used to produce micro-rods and solid, bimetallic and trimetallic rivets or to manufacture welded products onto a common metal strip.

Rolling consists of reducing the thickness of a strip by passing it between the two adjustable cylinders of a rolling mill. Here also each passage of the strip between the cylinders is accompanied by a stress-relieving thermal treatment (annealing).

Strips can be supplied with or without a brazing layer or stampped out in the shape of tips.

 
 
 
今日双色球开奖号码 北京时时02468漏洞 5大联赛什么时候开始 幸运鲤锦还是幸运锦鲤 老11选5开奖结果 内蒙古时时五码走势 奇趣开奖在什么网站看 棋牌平台 11元选5开奖结果陕西 大乐透彩票玩法介绍 明星河北麻将从哪买挂